Page Comparison

...

• CXO Version 21.3.3 (or higher)

• .NET 56.0 or higher has to be installed

• Longview version 21.2 or newer

...

Note: To use the Longview Adapter you require a license key with Longview enabled.

1. Create a new source system in the SSM for the correct source type: Longview to create:

   • Fact database

   • SSAS cube

2. Initialize the Longview adapter and the source. This is performed by running a few commands which require few parameters as an input.
   For more information on the available commands and their parameters, run the CXO.Adapter.LongviewTidemark.Cli.exe help command for detailed descriptions.

3. Open command line as Administrator, browse to the Longview adapter folder and run the initialize command to create the configuration database.

4. Run the create-source-in-adapter command to create a new Longview source.

• IMPORTANT: At this point you can decide the type of Longview source as either Longview Close or Longview Tax. This selection cannot be changed after source creation!
  Longview Plan and Longview Close work the same way. Similarly, Longview Tax and Transfer Pricing work the same way. But if you want to integrate with Longview Plan, you need to select Longview Close, and if you want to connect to Transfer Pricing, you will have to select Longview Tax.

• After running the above commands, the adapter is configured, and a first source is available. When multiple sources are required, run the create-source-in-adapter command for each source that is required.

• Each source is created with a default configuration for dimensions, Longview symbol names, etc. These defaults need to be changed for the source to function properly. The next section explains how to configure the Longview sources.

...

To update the connection fields, run the following query command with the correct values and source name. When certain values do not need to be replaced, remove those lines from the query.

QUERY 2

update  sc
set     sc.Url = '...',
        sc.UserName = '...',
        sc.Password = '...',
        sc.ListenerPort = 0,
        sc.Access = '...',
        sc.UserGroup = '...',
        sc.InstanceId = '...'
from    LVSourceConfiguration sc
join    Source s on sc.SourceId = s.Id
where   s.Name = 'SOURCE NAME HERE'

An example to replace just the URL and credentials for a source called MyLongviewSource:

...

...

parameters. Especially use this command when updating password. If password is updated by SQL update query it will not be encrypted, running this command updates and encrypts the password.

Other option to update the connection fields is by running the following query with the correct values and source name. When certain values do not need to be replaced, remove those lines from the query. This update query should not be used for updating the Password value since it will not be encrypted. Use the above command for updating password.

QUERY 2

update  sc
set     sc.Url = '...',
        sc.UserName = '...',
        sc.UserNameListenerPort = 'Administrator0,
        sc.Access = '...',
        sc.UserGroup = '...',
        sc.PasswordInstanceId = 'secret_password...'
from    LVSourceConfiguration sc
join    Source s on sc.SourceId = s.Id
where   s.Name = 'MyLongviewSource'

Showing Dimension Configuration for a Source

To show the dimension mappings for a given source that has been configured, run the following query with the correct source name:

...

SOURCE NAME HERE'

An example to replace just the URL and credentials for a source called MyLongviewSource:

selectupdate  dm.LVSourceConfigurationId,sc
set         dm.CxoDimension, 
 sc.Url = 'https://example-url-to-longview-source.com',
        dmsc.LVDimensionName UserName = 'Administrator',
from    SourceLVSourceConfiguration ssc
join    LVSourceConfigurationSource scs on sc.SourceId = s.Id
join    DimensionMapping dm on dm.LVSourceConfigurationId = sc.Id
where   s.Name = 'SOURCE NAME HERE'

The result shows which Longview dimension is mapped to which CXO dimension. If the LVDimensionName column has a NULL value, nothing is mapped to this CXO dimension.

For each Longview dimension we also must configure:

• The symbol names to extract

• The symbol attributes to extract

• The description of the Longview dimension

To display the values for these fields that are currently configured, run the following query:

...

MyLongviewSource'

Showing Dimension Configuration for a Source

To show the dimension mappings for a given source that has been configured, run the following query with the correct source name:

QUERY 3

select  decdm.LVSourceConfigurationId, 
        decdm.DimensionNameCxoDimension, 
        dec.DimensionDescription,
        dec.SymbolNames, 
        dec.SymbolAttributes       dm.LVDimensionName 
from    Source s
join    LVSourceConfiguration sc on sc.SourceId = s.Id
join    LVDimensionsExtractionConfigurationDimensionMapping decdm on decdm.LVSourceConfigurationId = sc.Id
where   s.Name = 'SOURCE NAME HERE'

It is possible to extract additional attributes from the Longview system and link them to members in a configured dimension. To display the member attribute mappings The result shows which Longview dimension is mapped to which CXO dimension. If the LVDimensionName column has a NULL value, nothing is mapped to this CXO dimension.

For each Longview dimension we also must configure:

• The symbol names to extract

• The symbol attributes to extract

• The description of the Longview dimension

To display the values for these fields that are currently configured, run the following query:

QUERY 54

select  dmdec.IdLVSourceConfigurationId, 
        dmdec.CxoDimensionDimensionName,
         dmdec.LVDimensionNameDimensionDescription,
         mamdec.CxoMemberAttributeSymbolNames, 
        mam.SymbolAttributedec.SymbolAttributes        
from    Source s
join    LVSourceConfiguration sc on sc.SourceId = s.Id
join    DimensionMappingLVDimensionsExtractionConfiguration dmdec on dmdec.LVSourceConfigurationId = sc.Id
join	MemberAttributeMapping mam on mam.DimensionMappingId = dm.Id
where   s.Name = 'SOURCE NAME HERE'

For every dimension the SymbolAttribute that needs to be extracted from Longview and the CXO attribute on the member that needs to get the extracted value is displayed. For instance, the ZGPNativeCurrency attribute can be mapped to the Currency attribute of the CXO Entity dimension.

Updating Dimension Configuration for a Source

For updating dimension configuration of a Longview source:

1. Create a new dimension mapping from a Longview dimension to a CXO dimension.

2. Remove an existing dimension mapping from a Longview dimension to a CXO dimension.

3. Update symbol names, symbol attributes and/or dimension description for a mapped Longview dimension.

4. Create a new member attribute mapping.

5. Remove an existing member attribute mapping.

Create a Dimension Mapping

To create a new dimension mapping from a Longview dimension to a CXO dimension, run the following query with correct values for LVSourceConfigurationId and CxoDimension (from running QUERY 3) and the name of the LV Dimension you want to map.

QUERY 6

...

...

It is possible to extract additional attributes from the Longview system and link them to members in a configured dimension. To display the member attribute mappings that are currently configured, run the following query:

QUERY 5

select  dm.Id,
        dm.CxoDimension, 
        dm.LVDimensionName, 
        mam.CxoMemberAttribute, 
        mam.SymbolAttribute
from    Source s
join    LVSourceConfiguration sc on sc.SourceId = s.Id
join    DimensionMapping dm on dm.LVSourceConfigurationId = sc.Id
join	MemberAttributeMapping mam on mam.DimensionMappingId = dm.Id
where   s.Name = 'SOURCE NAME HERE'

For every dimension the SymbolAttribute that needs to be extracted from Longview and the CXO attribute on the member that needs to get the extracted value is displayed. For instance, the ZGPNativeCurrency attribute can be mapped to the Currency attribute of the CXO Entity dimension.

Updating Dimension Configuration for a Source

For updating dimension configuration of a Longview source:

1. Create a new dimension mapping from a Longview dimension to a CXO dimension.

2. Remove an existing dimension mapping from a Longview dimension to a CXO dimension.

3. Update symbol names, symbol attributes and/or dimension description for a mapped Longview dimension.

4. Create a new member attribute mapping.

5. Remove an existing member attribute mapping.

Create a Dimension Mapping

To create a new dimension mapping from a Longview dimension to a CXO dimension, run the following query with correct values for LVSourceConfigurationId and CxoDimension (from running QUERY 3) and the name of the LV Dimension you want to map.

QUERY 6

declare @lv_dimension_name varchar(255) = 'LV DIMENSION NAME HERE';
declare @lv_source_configuration_id uniqueidentifier = 'LV SOURCE CONFIGURATION ID HERE';
declare @cxo_dimension varchar(50) = 'CXO DIMENSION HERE';

update	DimensionMapping
set		LVDimensionName = @lv_dimension_name
where	LVSourceConfigurationId = @lv_source_configuration_id
and		CxoDimension = @cxo_dimension

insert into LVDimensionsExtractionConfiguration (
    Id, DimensionName, LVSourceConfigurationId, SymbolNames, 
    DimensionDescription, SymbolAttributes)
values (newid(), @lv_dimension_nname, @lv_source_configuration_id, '', '', '')

Update Symbol Names, Symbol Attributes and Dimension Description which are yet to be configured.

For Longview plan and close, the time period dimension is by default mapped to the other three dimensions, Year, Period, and View. To add a 4th dimension (usually category) run the following query:

QUERY 7

update	DimensionMapping
set		LVDimensionName = @lv_dimension_name'TimePer'
where	LVSourceConfigurationId = @lv_source_configuration_id
and		CxoDimension = @cxo_dimension

insert into LVDimensionsExtractionConfiguration (
    Id, DimensionName, LVSourceConfigurationId, SymbolNames, 
    DimensionDescription, SymbolAttributes)
values (newid(), @lv_dimension_nname,'CAT'

Update Symbol Names, Symbol Attributes and Dimension Description which are yet to be configured.

Note: Depending on the Longview installation and configuration TimePer could be named under a different identifier. Other names could be ‘Timeper’, ‘TIMEPER’, ‘Timeperiods’. to check this name, run the following query:

select LVDimensionName
from DimensionMapping
where
LVSourceConfigurationId = @lv_source_configuration_id, '
and CxoDimension in ('YER', 'PER', 'VIW')

Update Symbol Names, Symbol Attributes and Dimension Description which has not yet been configured.

group by LVDimensionName

Remove a Dimension Mapping

To remove a dimension mapping from a Longview dimension to a CXO dimension, run the following query with correct values for LVSourceConfigurationId and CxoDimension (run QUERY 3).

QUERY 78

declare @lv_source_configuration_id uniqueidentifier = 'LV SOURCE CONFIGURATION ID HERE';
declare @cxo_dimension varchar(50) = 'CXO DIMENSION HERE';
declare @lv_dimension_name varchar(255) = (
    select LVDimensionName 
    from DimensionMapping 
    where LVSourceConfigurationId = @lv_source_configuration_id 
    and CxoDimension = @cxo_dimension
);

update  DimensionMapping
set     LVDimensionName = NULL
where   LVSourceConfigurationId = @lv_source_configuration_id
and     CxoDimension = @cxo_dimension

delete from LVDimensionsExtractionConfiguration
where   LVSourceConfigurationId = @lv_source_configuration_id 
and     DimensionName = @lv_dimension_name

...

To update symbol names, symbol attributes and dimension description for a LV dimension, run the following query with the correct LVSourceConfigurationId and DimensionName (run QUERY 4).

QUERY 89

update  LVDimensionsExtractionConfiguration
set     SymbolNames = '...',
		SymbolAttributes = '...',
		DimensionDescription = '...'
where   LVSourceConfigurationId = 'LV SOURCE CONFIGURATION ID HERE'
and     DimensionName = 'DIMENSION NAME HERE'

...

To create a new member attribute mapping for a specific dimension, run the following query with the correct DimensionMappingId (run QUERY 5).

QUERY 910

insert into MemberAttributeMapping 
    (Id, DimensionMappingId, CxoMemberAttribute, SymbolAttribute)
values (
    newid(), 
    'DIMENSION MAPPING ID HERE', 
    'CXO MEMBER ATTRIBUTE HERE', 
    'SYMBOL ATTRIBUTE HERE')

...

To remove an existing member attribute mapping, run the following query with the correct DimensionMappingId and SymbolAttribute (run QUERY 5).

QUERY 1011

delete from MemberAttributeMapping
where DimensionMappingId = 'DIMENSION MAPPING ID HERE'
and   SymbolAttribute = 'SYMBOL ATTRIBUTE HERE'